Skip to content
Acouso

Acoustic Ray Analysis

View a Spatial Heat Map

2.2 interface · Open Early Access

Display eligible saved values on the configured layers and read them with the correct scale and qualifications.

On this page

You’ll need: Heat-map layers created in Setup, and a saved result run after they were added.

Choose the metric and scale#

  1. Open Experience → Spatial Heat Map.
  2. Choose Value to show.
  3. Check the Colour range and the units on the legend.
  4. Choose the layers, then click Show heat map.

Adjust the display#

Use Map style, Map detail, label opacity, line spacing and overlays to make the view readable.

Colours between sample points are interpolated — display settings don’t add accuracy. Select the image to enlarge it.

Screenshot preview

Compare carefully#

  • Use the same metric, units and colour range for every design you compare.
  • Note any message about values outside the colour range.
  • Keep estimate and unavailable labels visible.

Check your result#

The metric you want is shown on the right layers, with a readable legend. To share it, export an image.

Continue learning

Acouso-ROOM