Skip to content
Acouso

Room Analysis

Check occupancy and geometry

2.2 interface

Review the room use and dimensions, and apply a room-specific override when it is appropriate.

On this page

You’ll need: The room open in Room Analysis, and its intended use and height.

Review occupancy#

The Compliance panel shows the room’s occupancy and the recommended sound level and reverberation time that come with it.

The occupancy sets the room’s targets. Select the image to enlarge it.

Screenshot preview

  1. Choose an occupancy from the Acouso-ROOM Occupancy list.
  2. Wait for the room to update, then read the new recommendation.
  3. To return to the project assignment, click Use Default.

Review room geometry#

Geometry shows Room Height, Room Floor Area and Room Volume. If these look wrong, check the room’s boundaries in Revit first.

Height is entered in the units shown. Select the image to enlarge it.

Screenshot preview

  1. To override the height, enter it in the units shown.
  2. Click Apply and wait for the result to refresh.
  3. To return to the model height, click Use Default.

Check your result#

Close and reopen the room — the occupancy and height you set are still there, and the prediction reflects them.

Continue learning

Acouso-ROOM