You’ll need: A completed, saved analysis. Check the result date — if the setup changed since, the result may be out of date.
Select a listening position#
- Open Results → Overview.
- Choose a Listening position.
- Confirm its name and the saved result it belongs to.
Read the overview#
Start with the overall message, then the reverberation, speech and clarity values, any uncertainty and the suggested next step. Each value carries a state:
| State | Meaning |
|---|---|
| Supported | Within the result’s stated scope and assumptions — still a prediction. |
| Estimate | An estimate; quote it as one. |
| Unavailable | No value could be produced. Read the reason — it isn’t zero. |
| Out of date | The setup has changed since this result was saved. |
Follow a suggested investigation#
A suggested next step points at something worth a look, such as source direction or strong reflections. Check the model before acting on it — it’s a pointer, not a design assessment.
Check your result#
You know which position and run you’re reading, and the state of each value you plan to use. For frequency, level or timing detail, open the other Results tabs.