Run a full-project acoustic analysis

You’ll need: Placed, enclosed Revit rooms with occupancies and baseline materials assigned, and a signed-in account with analysis access.

Review the prepared project#

1. Open the main window.
2. Confirm every room has an occupancy.
3. Resolve any Surface Materials messages.
4. Confirm Settings, especially linked-room scope and units.
5. Leave Analysis Override Resets unticked.

Run the analysis#

1. Click Run Acoustic Analysis once.
2. If a scope, source or input message appears, read it and decide whether to continue.
3. Wait for calculation and saving to finish, then read Analysis Runtime Notes.

Screenshot preview

Close

Review the saved schedule#

1. Open Project Schedule → Rooms and Reverberation.
2. Confirm the analysed room count and source models are what you expect.
3. Select a room you know and confirm its saved date, target and prediction.
4. Click Open Room Analysis to look at that room in detail.

If the result is incomplete#

Check that rooms are placed and enclosed, linked models are loaded and materials are resolved. An older saved result can stay visible when its source is unavailable — its date tells you it wasn’t updated.

Check your result#

Every room you expect appears in Project Schedule with a new analysis date.