Skip to content
Acouso

Acoustic Ray Analysis

Review Acoustic Ray materials

2.2 interface · Open Early Access

Inspect the constructions included in the analysis and resolve project material assignments that need attention.

On this page

Open Materials#

  1. Open Setup → Materials.
  2. Choose Needs attention, Assigned or All.
  3. Use Search or the category filters to find a construction.
Each construction shows its source model and assignment status. Select the image to enlarge it.

Screenshot preview

Inspect and assign#

  1. Search for a construction by name, category, source model, assignment status or assigned acoustic material, then select it.
  2. Click Inspect for its Revit details, or Zoom to for its place in the model.
  3. Select Assign material… to apply a project-wide assignment.
  4. Choose the acoustic material and apply it.
An unassigned construction selected in the list. Select the image to enlarge it.

Screenshot preview

The matching elements are highlighted in the model. Select the image to enlarge it.

Screenshot preview

The actions available for the selected construction. Select the image to enlarge it.

Screenshot preview

Understand the scope#

These are project-wide assignments, shared with Surface Materials and other analyses — a duplicated analysis doesn’t get its own copy. Clear assignment affects every use of that construction.

Check your result#

Needs attention is empty. If you change model scope or loaded links, refresh the list and check again.

Continue learning

Acouso-ROOM