Skip to content
Acouso

Acoustic Ray Analysis

Read Acoustic Ray reverberation

2.2 interface · Open Early Access

Review the selected position’s decay summary and compare available frequency-band results.

On this page

Choose the result view#

  1. Open Results → Reverberation.
  2. Confirm the listening position.
  3. Read the summary and the decay method it uses.

Choose a decay method#

Use the same decay method when comparing curves. Select the image to enlarge it.

Screenshot preview

Choose EDT, T20 or T30 as available. If a method is unavailable, don’t substitute another — the comparison changes.

Read the chart#

Frequency runs along the axis, time in seconds up the side, with one line per position. Select the image to enlarge it.

Screenshot preview

  1. Read the frequency labels and units.
  2. Click Show selected position to focus on one listening position.
  3. Compare positions only within the same saved run.
  4. Gaps and estimate styling are explained in the legend.

Check your result#

You can state the method, frequency range and position behind each value. Acoustic Ray decay and Room Analysis reverberation are different predictions — label them separately.

Continue learning

Acouso-ROOM