Place a listening position#
- Open Setup → Positions.
- Click Add listening position and follow the Revit prompt.
- Give the position a clear name.
- Click Edit to set Placement, Purpose, Background and Appearance.
Review purpose and background#
Place at least one listening position before running. Under Listening positions (receivers), choose a Purpose or Technical results only. The shared choice applies to existing and new positions. If prompted, confirm before replacing individual purposes. To give one position a different purpose, select Edit on that position. Configure its background separately.
| Choice | Meaning |
|---|---|
| Purpose | What the position is for, which shapes how its result is read. |
| Background not specified | No background noise is supplied. |
| Ideal quiet | Background noise is deliberately left out. |
| Custom background | Background noise you supply, marked as assumed or measured. |
0 dB SPL is a level, not silence or “not specified”.
Save the position#
- Check the coordinates and the point in the model.
- Check the purpose, overview-reverberation choice and background.
- Click Save changes.
- Use Save and apply to all only if every listening position should share these settings.
Check your result#
Each listening position is in the right place with the right settings. Changing a position doesn’t alter results that were already saved.