Skip to content
Acouso

Room Analysis

Inspect surfaces and constructions

2.2 interface

Identify a selected room surface, review its acoustic composition and inspect its Revit construction context.

On this page

Select and identify a surface#

  1. Select a surface in the room diagram or table.
  2. Confirm the highlighted area matches the surface row.
  3. Read its Base Material, Finish and Acoustic treatment.
The selected surface is highlighted in the diagram and table. Select the image to enlarge it.

Screenshot preview

Inspect the Revit construction#

  1. Click Inspect in Surface Composition.
  2. Read the representative element and its construction build-up.
  3. Close the dialog to return.
Inspection is read-only. The diagram is schematic, so its orientation is approximate. Select the image to enlarge it.

Screenshot preview

Review material readiness#

A Generic or unresolved material message means an input needs fixing. Correct the project mapping in Surface Materials, or the room assignment here, before relying on results.

Check your result#

You can match each surface to its area, acoustic materials and Revit construction.

Change materials project-wide in Surface Materials, or for this room only with finishes and treatment.

Continue learning

Acouso-ROOM